Why to Use Needlepoint Bipolar Ionization

Needlepoint Bipolar Ionization benefits

Needlepoint Bipolar Ionization: Has your facility fallen victim to covid-19 yet? Have you had a case of covid-19 in a facility?   If not yet, better safe than sorry. Coronavirus is a novel disease with no known cure but Vaccines only. The virus has brought about fear among people because of its side effects. However, the World Health Organization has recommended specific measures that each facility should take to Needlepoint Bipolar Ionizationensure the safety of its workers and customers.

As a facility owner, it is advisable to consider the recommendations given to ensure that your facility’s running continues. Needlepoint bipolar ionization is a technology that promises to fight against Coronavirus and other disease-causing pathogens, leaving your indoor air super clean. This technology works by using double irons introduced in the year, which then combine with the smaller particles of Coronavirus, which would have been otherwise difficult to eliminate.

Coronavirus is protected by a protein capsid that contains hydrogen ions that are positively charged. Therefore, by introducing the two ions from needlepoint bipolar ionization technology, the virus loses electrons, making it lose the protein capsid that protects it. Without protection, the virus cannot inhibit a new host. Below are three reasons why you should consider little point bipolar ionization in a facility;

3 Reasons Why to Use Needlepoint Bipolar Ionization

a). There is no risk of ozone

Needlepoint Bipolar IonizationThe ions introduced by needlepoint bipolar ionization do not produce ozone or other harmful by-products. Naturally, we have fresh air outdoors because ions are produced from sunlight waterfalls which help clear the air we breathe. Similarly, you could achieve the same outdoor fresh air in your facility by introducing irons from needlepoint bipolar ionization.

This means that your customers and staff are protected from the snares of Coronavirus and harmful ozone, which may lead to respiratory diseases. This technology ensures that your facility retains its customers and increases productivity since everybody is assured that they are protected from disease-causing pathogens.

b). Fights against disease-causing pathogens

Indoor air in any facility contains disease-causing pathogens such as mildew and the most recent Coronavirus. Particles containing these packages are sent to be suspended in the air, which lasts for an extended period. Coronavirus is believed to survive for 24 hours in the year or on another surface within a building.

This allows the particles to be transmitted from one host to another. However, using needlepoint bipolar ionization in a facility eliminates such pathogens. Introducing the iron within your facility has a snowball effect whereby the particles in the air begin to cluster together, forming a giant ball that is now equal to what they got rid of by filtration systems. Also, the particles are unable to survive further and do not pose a risk of contamination to a new host.

c). Elements Particles giving clean air

Needlepoint Bipolar Ionization benefitsAir contains particles such as dust allergens and mildew, which are not visible. However, we cannot ignore the fact that these particles are in the year and might lead to respiratory diseases. Coronavirus, although a novel disease, is also in the air.

That is why the Centers for Disease Control and Prevention (CDC) gives various preventive measures against the virus. Wearing a mask was to prevent inhalation of such particles in the air. In addition to the mask, you need to introduce needlepoint bipolar ionization in a facility to ensure that all particles are eliminated, providing clean air to your customers and staff.

In conclusion, consider using needlepoint bipolar ionization in your facility as it is safe and protects against Coronavirus. This technology has not been reported to have any adverse side effects on its users. However, Coronavirus has far worse effects since it might result in the closure of your facility.

Call Now for more information

1-800-368-8385

Fundamentals of Midwest Needlepoint Bipolar Ionization

3 fundamentals of Midwest Needlepoint Bipolar Ionization

Midwest Needlepoint Bipolar Ionization works by producing both negative and positively charged ions into the air, destroying organic compounds and pathogens, and also assists in coalescing dust and mold particles to ease filtration from indoor spaces. While initially meant for hospitals, the Midwest Needlepoint Bipolar Ionization has found wide acceptance and usage within the industrial sector, especially in light of the Covid 19 outbreak.

Modes of Working

The Midwest Needlepoint Bipolar Ionization splits oxygen into bipolar oxygen ionsThere are two ways that Midwest Needlepoint Bipolar Ionization works. Using Corona Discharge and NPBI. Corona discharge involves the direct ionization of air using a pair of electoral conductors. This process was used in the first Ionization equipment and was prone to producing ozone which is harmful to humans in the process of ionizing the air.

The Midwest Needlepoint Bipolar Ionization method produces a high voltage electric field (plasma) created by a pair of negatively and positively charged electrodes to extract ions from existing molecules. NPBI efficiency is checked using gas chromatography to determine the number of ionized particles in a volume of air. The bipolar ions produced have a short life span, usually lasting 300 seconds before losing their charge. The Midwest Needlepoint Bipolar Ionization system uses the existing air conditioning systems to deliver the ions to office spaces.

First, getting the correct readings of ions in the air is challenging if the device is located within the duct works. In this scenario, they may be best suited to filter incoming air or prevent the escape of pathogens and harmful particles into the atmosphere. On the other hand, if mobile air filtration systems are used, which enable the device to be located within an office, then proper readings on ionization levels are likely to be achieved.

Action against pathogens

Midwest Needlepoint Bipolar Ionization can split water molecules into constituent positively charged Hydrogen Ions and negatively charged hydroxyl ions.Midwest Needlepoint Bipolar Ionization can split water molecules into constituent positively charged Hydrogen Ions and negatively charged hydroxyl ions. NPBI also splits oxygen into bipolar oxygen ions. The bipolar ions adhere to the surfaces of pathogens and damage them by combining with Hydrogen and Nitrogen atoms from the surface of the pathogens.

The result is that even pathogens not killed in the process no longer have the functional receptors to adhere to host cells, rendering them harmless. For viral infections, the impact of having hydrogen or nitrogen removed results in the deformation of their external binding structures. The deformation causes cellular integrity ruptures for bacteria, causing the cells’ immediate death. Volatile organic particles like compounds producing odors are also robbed of hydrogen atoms, neutralizing their odors.

Action against particles

Midwest Needlepoint Bipolar Ionization benefitsThe NPBI system acts the same against dust and mold in the air. The bipolar ions bind with particles in the air in an attempt to lose their charge. As this happens, the particles become charged and attract more molecules and solid particles within the airspace, causing them to merge and form larger particles. The larger particles are easily filtrated by existing air conditioning and filtration systems resulting in cleaner air with fewer solid particles.

These three concepts are the building blocks of NPBI technology. The application of such a system in commercial spaces holds much promise compared to traditional air filtration and sanitization measures. The key consideration should be the best location to place the NPBI technology to maximize the air filtration and cleaning effects. It is important to note some of the user challenges in determining the system’s effectiveness.

For commercial settings, using Midwest Needlepoint Bipolar Ionization technology is bound to reduce the costs and overheads of traditional air filtration systems. Despite the failure to produce 100% efficiency in real-world applications, the technology works well by complementing traditional HVAC systems and, with adequate research and proper installation, is bound to increase in efficiency.

Call Now for more information

1-800-368-8385

Want to know about Needlepoint Bipolar Ionization?

Needlepoint Bipolar Ionization

Four Burning Questions / Answered!

Should you include needlepoint Bipolar ionization (“NPBI”) in your commercial HVAC design toolbox? Savvy business owners are often wary of air purification claims, as air purification technologies usually lack data and are often backed only by anecdotal evidence. That said, NBPI by Globals Plasma Solutions has cemented a foothold in HVAC design — as it can minimize project installation costs and energy consumption while improving indoor air quality (IAQ).

Q1. What is Needlepoint Bipolar Ionization?

Needlepoint Bipolar Ionization service in Louisville, KYNeedlepoint Bipolar Ionization is a commercially accessible technology from Global Plasma Solutions that produces a stream of ions capable of capturing airborne gaseous pollutants and volatile organics. When electricity is applied to a cathode-ray tube with two electrodes, negative and positive ions are produced, which react with the water vapor and oxygen in the air to create free radicals. Free radicals can effectively eliminate microbial growth and break down odors, thereby improving the IAQ in your commercial facility.

Typically, a module is installed near the fan inlet of an HVAC system — specifically an air handling unit (AHU). It is still necessary to filter out numerous tiny organic materials in a process called media filtration. By eliminating gasses, vapors, and particulate matter at their source, you can realize cost and energy savings through reduced outside air ventilation rates.

Q2. How to reduce outside air ventilation rates and still meet the code?

The IAQ Procedure in the American Society of Heating, Refrigerating and Air-Conditioning Engineers (ASHRAE) Standard 62.1 allows the use of engineered air purification systems in conjunction with reduced outdoor air ventilation rates. Therefore, the equipment can be sized smaller, which results in lower initial costs, reduced energy consumption, cleaner evaporator coils, and improved temperature and humidity control while maintaining acceptable IAQ levels.

Louisville best Needlepoint Bipolar Ionization serviceRather than relying on brute force dilution of contaminants by adding more fresh air to indoor spaces, required outside airflow rates can be lowered by tackling the contaminants of emerging concern (CECs) directly. Needlepoint Bipolar Ionization breaks down harmful volatile organic compounds (VOC), kills viruses, bacteria, and mold, increases the efficiency and efficacy of filtration by particle aggregation, and oxidizes odorous compounds in gasses. For example, recent research published in the Journal of Physics D: Applied Physics revealed that nonthermal plasma (also called cold or non-equilibrium plasma) effectively eliminated 99.9% of airborne viruses.

The acceptable amount of concentration for the CEC design is “equal to or less than” the concentration obtained using the “ventilation rate procedure” (section 6.2) in ASHRAE standard 62.1. Concentration targets should be included in design documents.

Q3. How about lowering CO2 levels?

While Needlepoint Bipolar Ionization enhances indoor air quality by removing CECs, it results in higher carbon dioxide (CO2) levels than the ventilation rate procedure. CO2 is not classified as a CEC by ASHRAE. However, it has historically been used as an easy-to-measure proxy for IAQ — as a higher CO2 level often signals a higher concentration of other airborne contaminants.

Needlepoint Bipolar Ionization is air purification systemASHRAE does not recommend a specific CO2 level — just that very high CO2 concentrations (e.g., higher than 5000 parts per million or ppm) might represent a health risk. Additionally, ASHRAE notes that CO2 concentration is not a good marker of the concentration and occupant acceptance of other indoor air pollutants, such as VOCs released by building materials and furnishings. Therefore, CO2 concentration is not a reliable indicator of the overall IAQ in your commercial facility.

Nonetheless, we recommend taking a careful approach when designing to a significantly higher CO2 level since future studies may reveal more definitive data on CO2’s influence on IAQ.

Q4. What about harmful levels of ozone?

Needlepoint Bipolar Ionization has been around for quite a while. The earlier generation of generators relied on perishable glass tubes and produced potentially hazardous ozone (O3) in the process. However, Global Plasma Solutions’ needlepoint modules, developed in the mid-2000s, do not generate dangerous ozone levels. They are certified to the Revised Standard for UL 867 – Electrostatic Air Cleaners, limiting ozone to 0.05 ppm by volume.

While improving indoor air quality has always been important, there has never been a better time to invest in IAQ solutions than now. By installing a Needlepoint Bipolar Ionization system from Global Plasma Solutions, you can help prevent the spread of bacteria and viruses and enhance the health of your facility.

Get Needlepoint Bipolar Ionization, call now

Call Now for more information

1-800-368-8385

Tag: Needlepoint Bipolar Ionization

Midwest Needlepoint Bipolar Ionization 24/7 Quality Service

needlepoint bipolar ionization service

Midwest Needlepoint Bipolar Ionization Service for Better Air Quality

Midwest Needlepoint Bipolar Ionization is available on one phone callIf your facility is hoping to achieve cleaner air, contact Midwest Parts Center to discover our Midwest needlepoint bipolar ionization service. Air-Conditioning units can be used to purify the air. Air purification contributes to a healthier environment that is germ-free. Furthermore, Midwest needlepoint bipolar ionization provides additional benefits for end-users looking to improve commercial buildings’ air quality. 

Midwest Needlepoint bipolar ionization is not a new technology. In fact, the treatment has been used in commercial air-conditioning for many years. Today, however, facility managers are interested in learning more about how they can deliver cleaner air in the wake of the coronavirus. Commercial facilities and industrial plants can apply Midwest needlepoint bipolar ionization service to existing air-conditioning units to remove impurities from the atmosphere. 

Midwest Needlepoint Bipolar Ionization killing 99% viruses form airThere is more to air-conditioning than just cool air. Air-Conditioning controls temperature, which is beneficial in maintaining productivity. Additionally, cool air retains materials and prevents damage from irregular temperatures. Midwest Needlepoint bipolar ionization plays an important role in maintaining temperature by controlling outside air. 

Furthermore, increased exposure to outdoor air can result in VOCs, which are volatile organic compounds. Harmful compounds may cause building occupants to become ill in several ways. Occupants of a building can become ill with something known as building sickness due to harmful exposures. Additionally, each year employees miss countless days from work because of illness. 

Many people demonstrate sensitivities to contaminants such as mold and mildew. Furthermore, mold growth and also mildew contributes to foul odors. Bad smells circulate throughout a facility by way of the ventilation system. To prevent bad odors from entering a facility, Midwest needlepoint bipolar ionization kills pathogens before they spread. 

Midwest Bipolar Ionization and Air-Conditioning Systems

Midwest Needlepoint Bipolar Ionization very easy to install anywhereTreating air-conditioning units with purification tools is an economical way to manage air temperature and target the source of germs. There is, however, a way to address the challenge of halting potential outbreaks before they happen in a building. Air-Conditioning units are readily available in large complexes. All facilities, regardless of size, will benefit from the latest clean air technology.

During bipolar ionization, ions travel through the air-conditioning system while neutralizing pathogens like viruses and bacteria. Moreover, the technology has a fast kill rate eliminating common germs within just a few minutes. One of the greatest benefits of bipolar ionization is that it continues to work in the air. In fact, the technology is also able to remove germs on the surface. Finally, ionization inactivates viruses, and therefore they are unable to infect unsuspecting victims. 

A commercial HVAC technician is capable of installing ionization in an air-conditioning unit. The advanced service is worth the investment. In fact, end-users can expect to gain better control of outdoor air and increased efficiency. Because operational costs are a major concern, clean air technology will provide notable cost savings for operations. 

Interested in learning how to improve your commercial HVAC unit with purified air services? Contact us.

Call Now for more information

1-800-368-8385

Midwest Needlepoint Bipolar Ionization Effects Best solution on call 24/7

needlepoint bipolar ionization

Midwest Needlepoint Bipolar Ionization and Viruses

Midwest Needlepoint Bipolar Ionization is air purifying systemMidwest Needlepoint Bipolar Ionization: Industries use HVAC equipment to provide comfortable ambient temperatures inside facilities. Heating and cooling units control much more than comfort. In truth, a significant feature of HVAC systems is creating clean air. Breathable air inside buildings is a vital part of keeping a secure working environment and, above all, reducing illness. Midwest Needlepoint bipolar ionization is but one tool which is utilized to create healthier air in facilities.

Some people are curious about what precisely is Midwest needlepoint bipolar ionization? Since ventilation systems are vulnerable to particulate matter, certain occupants might be subjected to certain dangerous pathogens. As a result, doing work in areas where the air isn’t purified may result in severe health consequences. Improved Midwest Needlepoint Bipolar Ionization is air purifying systemhealth problems among occupants in a facility drive downward profitability and productivity. Furthermore, there are monetary considerations for employers and individuals when illness strikes, thus eliminating individuals from their roles and responsibilities. Additionally, facilities are frequented by outsiders who conduct business and deserve the cleanest air possible.

Bipolar ionization relates to the need for purified air. The procedure is centered on targeting airborne pollutants. Surrounding the development of Midwest needlepoint bipolar ionization, power is modified to deal with pollutants. Volatile organic and natural components, viruses, germs, and mildew are decimated by ionization. Ionization works effectively in controlling disease in industrial and commercial settings.

Midwest Needlepoint Bipolar Ionization Discoveries

The benefits of Midwest Needlepoint Bipolar IonizationResults suggest that Midwest needlepoint bipolar ionization is profitable in enhancing the environment’s quality, though additionally, it plays a role in effective HVAC efficiency. Furthermore, research suggests that bipolar ionization cuts down on the expenses regarding heating and cooling units found in business establishments.

When utilized in HVAC systems, the development of bipolar ionization offers many benefits that are ideal for end-users. Primarily, the flow of outside air is restricted by the process. When the outside atmosphere moves right into a building, the ventilation elements are vulnerable to harvesting microorganisms. End-users will soon realize that there are many favorable results after incorporating a simple but highly effective clean air application into  HVAC devices. The mechanism is not cumbersome in size; however, the cost savings are ample.

The research concludes that the ionization procedure is effective in killing typical germs that circulate in facilities.

We know that every company differs and that’s exactly why we offer a broad range of services. Schools, medical facilities, and industrial buildings have considered the advantages of bipolar ionization and have chosen to select the application for heating and cooling equipment as an addition. Whether you want to stimulate your heating and cooling units’ effectiveness or provide fresher air, we possess some of the most sought-after solutions out there. Get the absolute most out of your ventilation packages and also supply the cleanest air to breathe while utilizing the newest technology offered. Explore our suite of services to improve your cooling and heating systems. We are your experts in Midwest.

Contact us to inquire about our clean air capabilities today.

Call Now for more information

1-800-368-8385