3 best fundamentals of Midwest Needlepoint Bipolar Ionization

3 fundamentals of Midwest Needlepoint Bipolar Ionization

Midwest Needlepoint Bipolar Ionization works by producing both negative and positively charged ions into the air, destroying organic compounds and pathogens, and also assists in coalescing dust and mold particles to ease filtration from indoor spaces. While initially meant for hospitals, the Midwest Needlepoint Bipolar Ionization has found wide acceptance and usage within the industrial sector, especially in light of the Covid 19 outbreak.

Modes of Working

The Midwest Needlepoint Bipolar Ionization splits oxygen into bipolar oxygen ionsThere are two ways that Midwest Needlepoint Bipolar Ionization works. Using Corona Discharge and NPBI. Corona discharge involves the direct ionization of air using a pair of electoral conductors. This process was used in the first Ionization equipment and was prone to producing ozone which is harmful to humans in the process of ionizing the air.

The Midwest Needlepoint Bipolar Ionization method produces a high voltage electric field (plasma) created by a pair of negatively and positively charged electrodes to extract ions from existing molecules. NPBI efficiency is checked using gas chromatography to determine the number of ionized particles in a volume of air. The bipolar ions produced have a short life span, usually lasting 300 seconds before losing their charge. The Midwest Needlepoint Bipolar Ionization system uses the existing air conditioning systems to deliver the ions to office spaces.

First, getting the correct readings of ions in the air is challenging if the device is located within the duct works. In this scenario, they may be best suited to filter incoming air or prevent the escape of pathogens and harmful particles into the atmosphere. On the other hand, if mobile air filtration systems are used, which enable the device to be located within an office, then proper readings on ionization levels are likely to be achieved.

Action against pathogens

Midwest Needlepoint Bipolar Ionization can split water molecules into constituent positively charged Hydrogen Ions and negatively charged hydroxyl ions.Midwest Needlepoint Bipolar Ionization can split water molecules into constituent positively charged Hydrogen Ions and negatively charged hydroxyl ions. NPBI also splits oxygen into bipolar oxygen ions. The bipolar ions adhere to the surfaces of pathogens and damage them by combining with Hydrogen and Nitrogen atoms from the surface of the pathogens.

The result is that even pathogens not killed in the process no longer have the functional receptors to adhere to host cells, rendering them harmless. For viral infections, the impact of having hydrogen or nitrogen removed results in the deformation of their external binding structures. The deformation causes cellular integrity ruptures for bacteria, causing the cells’ immediate death. Volatile organic particles like compounds producing odors are also robbed of hydrogen atoms, neutralizing their odors.

Action against particles

Midwest Needlepoint Bipolar Ionization benefitsThe NPBI system acts the same against dust and mold in the air. The bipolar ions bind with particles in the air in an attempt to lose their charge. As this happens, the particles become charged and attract more molecules and solid particles within the airspace, causing them to merge and form larger particles. The larger particles are easily filtrated by existing air conditioning and filtration systems resulting in cleaner air with fewer solid particles.

These three concepts are the building blocks of NPBI technology. The application of such a system in commercial spaces holds much promise compared to traditional air filtration and sanitization measures. The key consideration should be the best location to place the NPBI technology to maximize the air filtration and cleaning effects. It is important to note some of the user challenges in determining the system’s effectiveness.

For commercial settings, using Midwest Needlepoint Bipolar Ionization technology is bound to reduce the costs and overheads of traditional air filtration systems. Despite the failure to produce 100% efficiency in real-world applications, the technology works well by complementing traditional HVAC systems and, with adequate research and proper installation, is bound to increase in efficiency.

Call Now for more information

1-800-368-8385

4 Burning Questions About Needlepoint Bipolar Ionization, perfect Answered!

Needlepoint Bipolar Ionization

Four Burning Questions / Answered!

Should you include needlepoint Bipolar ionization (“NPBI”) in your commercial HVAC design toolbox? Savvy business owners are often wary of air purification claims, as air purification technologies usually lack data and are often backed only by anecdotal evidence. That said, NBPI by Globals Plasma Solutions has cemented a foothold in HVAC design — as it can minimize project installation costs and energy consumption while improving indoor air quality (IAQ).

Q1. What is Needlepoint Bipolar Ionization?

Needlepoint Bipolar Ionization service in Louisville, KYNeedlepoint Bipolar Ionization is a commercially accessible technology from Global Plasma Solutions that produces a stream of ions capable of capturing airborne gaseous pollutants and volatile organics. When electricity is applied to a cathode-ray tube with two electrodes, negative and positive ions are produced, which react with the water vapor and oxygen in the air to create free radicals. Free radicals can effectively eliminate microbial growth and break down odors, thereby improving the IAQ in your commercial facility.

Typically, a module is installed near the fan inlet of an HVAC system — specifically an air handling unit (AHU). It is still necessary to filter out numerous tiny organic materials in a process called media filtration. By eliminating gasses, vapors, and particulate matter at their source, you can realize cost and energy savings through reduced outside air ventilation rates.

Q2. How to reduce outside air ventilation rates and still meet the code?

The IAQ Procedure in the American Society of Heating, Refrigerating and Air-Conditioning Engineers (ASHRAE) Standard 62.1 allows the use of engineered air purification systems in conjunction with reduced outdoor air ventilation rates. Therefore, the equipment can be sized smaller, which results in lower initial costs, reduced energy consumption, cleaner evaporator coils, and improved temperature and humidity control while maintaining acceptable IAQ levels.

Louisville best Needlepoint Bipolar Ionization serviceRather than relying on brute force dilution of contaminants by adding more fresh air to indoor spaces, required outside airflow rates can be lowered by tackling the contaminants of emerging concern (CECs) directly. Needlepoint Bipolar Ionization breaks down harmful volatile organic compounds (VOC), kills viruses, bacteria, and mold, increases the efficiency and efficacy of filtration by particle aggregation, and oxidizes odorous compounds in gasses. For example, recent research published in the Journal of Physics D: Applied Physics revealed that nonthermal plasma (also called cold or non-equilibrium plasma) effectively eliminated 99.9% of airborne viruses.

The acceptable amount of concentration for the CEC design is “equal to or less than” the concentration obtained using the “ventilation rate procedure” (section 6.2) in ASHRAE standard 62.1. Concentration targets should be included in design documents.

Q3. How about lowering CO2 levels?

While Needlepoint Bipolar Ionization enhances indoor air quality by removing CECs, it results in higher carbon dioxide (CO2) levels than the ventilation rate procedure. CO2 is not classified as a CEC by ASHRAE. However, it has historically been used as an easy-to-measure proxy for IAQ — as a higher CO2 level often signals a higher concentration of other airborne contaminants.

Needlepoint Bipolar Ionization is air purification systemASHRAE does not recommend a specific CO2 level — just that very high CO2 concentrations (e.g., higher than 5000 parts per million or ppm) might represent a health risk. Additionally, ASHRAE notes that CO2 concentration is not a good marker of the concentration and occupant acceptance of other indoor air pollutants, such as VOCs released by building materials and furnishings. Therefore, CO2 concentration is not a reliable indicator of the overall IAQ in your commercial facility.

Nonetheless, we recommend taking a careful approach when designing to a significantly higher CO2 level since future studies may reveal more definitive data on CO2’s influence on IAQ.

Q4. What about harmful levels of ozone?

Needlepoint Bipolar Ionization has been around for quite a while. The earlier generation of generators relied on perishable glass tubes and produced potentially hazardous ozone (O3) in the process. However, Global Plasma Solutions’ needlepoint modules, developed in the mid-2000s, do not generate dangerous ozone levels. They are certified to the Revised Standard for UL 867 – Electrostatic Air Cleaners, limiting ozone to 0.05 ppm by volume.

While improving indoor air quality has always been important, there has never been a better time to invest in IAQ solutions than now. By installing a Needlepoint Bipolar Ionization system from Global Plasma Solutions, you can help prevent the spread of bacteria and viruses and enhance the health of your facility.

Get Needlepoint Bipolar Ionization, call now

Call Now for more information

1-800-368-8385

Tag: Needlepoint Bipolar Ionization

How is Best Needlepoint Bipolar Ionization One Way to Counter the Spread of Covid-19?

Needlepoint Bipolar Ionization is air purifying systemNeedlepoint Bipolar Ionization: Covid-19 has been around for some time, causing devastating impacts on society. However, the time frame has also allowed professionals in the health sector to narrow down how the virus works and develop strategies to inhibit its spread. One of the critical establishments that researchers have made is that the virus can stay on different surfaces for some days. More importantly, research shows that the virus can rest in the air, thus quickly spreading via contact and breathing contaminated air. This aspect makes air purification in buildings a critical aspect of fighting the spread of the virus.

 

Air Purification Processes

The advantages of Needlepoint bipolar ionization.There are numerous appliances and devices that people apply to purify the air in their buildings. The primary method is controlling the source of air pollution within the building and removing it when possible. The other primary method of air purification is enhancing ventilation. This means increasing the flow of outdoor air into a building. One can enhance ventilation via openings like open windows and doors. Also, operating attic or window fans, ceiling fans, and air conditioners can help cleanse the air. Other firms could consider more complex air cleaners systems to purify the air, which varies in type and size.

For example, small portable air cleaners can rest on a table. Other air cleaners are vast and complex, and they cover the entire house. Global Plasma Solutions has introduced a newer technology to facilitate more effective air purification processes, namely Needlepoint bipolar ionization.

Needlepoint bipolar ionization Virus Inactivation

Needlepoint bipolar ionization is killing air virusesScientists also refer to the technology as bipolar ionization, a technology applied by HVAC systems or other portable air cleaners to create negatively or positively charged particles. The technology is advancing, and among the most recent ones are intended to fight viruses such as Covid,-19. In addition, it enhances the disinfection of surfaces, preventing the spread of infections. ISO-Aire™ can optimize the effect of needlepoint bipolar ionization (npbi) because it discharges high concentrations of ions from the source. As a result, it provides filtration with certified medical-grade HEPA filters.

The system helps to enhance clean air inside buildings, leveraging an electronic charge to create a high concentration of negative and positive ions. The ions move through the air consistently, seeking out particles in the air that they could attach to and create bonds. The activity sets in movement, a continuous pattern of particles combined in the air. The process results in bigger articles that the system can readily eliminate, reducing the particles present in the air. The process further mitigates disease-causing microorganisms from indoor spaces by inactivating them. When the negative and positive ions contact the microorganisms in the air, they establish microbicide effects on germs, lowering their power to infect cells.

Practical Approach to Counter Covid-19

Even though air purification is essential, it cannot exclusively help fight covid-19 alone. Society needs to combine this approach with the Center for Controlling Disease recommendations, such as washing hands, getting a jab, and maintaining social distancing. Using these air purification strategies alongside systems like Needlepoint bipolar ionization will effectively enhance the fight against the disease.

In conclusion, effective air purification is an aspect that can significantly help counter the spread of Covid-19 indoors. Clean air is no place for the Covid-19 virus to rest, meaning that purified air enhances the safety of workers and residents from getting infected. In this light, commercial and residential building owners should embrace the needlepoint bipolar ionization system alongside other ventilation systems to enhance optimal air purification. This way, the owners will be inhibiting the spread of the killer virus. And as it is always, it is better to prevent beforehand.

To Know about Needlepoint Bipolar Ionization

Call Now for more information

1-800-368-8385

2 Things You Should Know Before Utilizing Best Midwest Needlepoint Bi-polar Ionization?

You Should Know Before Utilizing Midwest Needlepoint Bi-polar Ionization

You Should Know Before Utilizing Midwest Needlepoint Bi-polar IonizationAs you may know, facility owners must possess intense processes to safeguard their premises against microbes. According to a recent report by the World Health Organization (WHO), Midwest needlepoint bi-polar ionization is contemporary expertise utilized in portable air sanitizers or HVAC structures to create negative and positive charged ions. This technology assists operators of facilities to improve the air eminence in their premises by utilizing their premises’ already-installed air treatment techniques.

Since the start of COVID-19, Midwest needlepoint bi-polar ionization has been one of the most dependable experts fighting to eradicate COVID-19, especially in places of work. As the Centers for Disease Control and Prevention (CDC) asserts, Midwest needlepoint bi-polar ionization is one of the leading air sanitization technologies that is contemporarily extensively utilized, in the United States, to keep the SARS CoV-2 virus at bay.

Unfortunately, even though there are several vaccines for the SARS CoV-2 virus, the traps of microbes are still sturdy. Besides, facilities and businesses have been untied, so the accountability of safeguarding against the microbes has been entirely perceived left at a personal stage. Therefore, individuals will be extremely enticed by governments to premises that regard their wellbeing and safeguard. This can be attained by utilizing measures like Midwest needlepoint bi-polar ionization on premises.

Benefits of Midwest Needlepoint Bi-polar Ionization

High quality of Benefits of Midwest Needlepoint Bi-polar Ionization with long term guarantyOne main benefit of Midwest needlepoint bi-polar ionization is that even though it does not cure viruses when used well, it generates a nifty defensive gadget against COVID-19. This is a benefit since the Midwest needlepoint bi-polar ionization technology can charge air particles, thus creating a neutral setting. These molecules in the air, for instance, COVID-19 molecules, are glued by the ions produced by the Midwest needlepoint bi-polar ionization gadget. It is also essential for you to comprehend that, during the process of attraction, large molecules are eliminated through the device’s filtration structure.

Even though this process is normally efficient, it is very important to note that there must be double ionization structures for the air to be cleaned adequately. These systems incorporate portable and room ionizers. Therefore, you must understand the best ionization system that best suits your cleaning needs. According to Food and Drug Administration (FDA), most people normally elect the room ionizers because they normally cover extensive areas. Besides, it is also vital for you to comprehend that the equipment in your premises may equally thwart your sterilization process. In this regard, it is recommended that you utilize portable needlepoint ionizers to perform effectively in bipolar ionization.

Benefits of Midwest Needlepoint Bi-polar Ionization is working well with HVAC alsoBesides, one main drawback of Midwest needlepoint bi-polar ionization is that, in most cases, the concentration of charges released by the ionizers on your cleaning surfaces may be extremely detrimental if released close to semiconductors. This impact is normally explicitly felt when the discharge from Midwest needlepoint bi-polar ionization occurs when the equipment is not on a zero level. However, the good news is that, in most cases, it is very complicated to have Midwest needlepoint bi-polar ionization equipment having zero charges, as this will mean that the equipment is damaged or faulty. Besides, it is detrimental if you decide to install computerized machines to assist you in assembling, testing, board manufacturing the needlepoint bi-polar ionization equipment.

According to the Centers for Disease Control and Prevention (CDC), utilizing computerized machines to assemble and test Midwest needlepoint bi-polar ionization equipment may lead to dangerous situations that the air ionization equipment may not regulate. Besides, suppose the needlepoint ionization equipment is damaged or faulty. In that case, your premises may be in danger, specifically when the equipment is the only gadget used to sanitize the air eminence in your facility. This will imply that the bacteria and viruses in your premises will recur again, thus posing a danger to your family members, clients, colleagues, and workers.

Call Now for more information

1-800-368-8385

Which 4 best points show that Needlepoint Bipolar Ionization can be Used Together With HVAC Systems?

Which 4 points show that Needlepoint Bipolar Ionization can be Used Together With HVAC Systems?

Which 4 points show that Needlepoint Bipolar Ionization: The world is now aware of the severe threat of new germs and viruses that pose health concerns and problems to persons and schools due to the Covid-19 epidemic. As a result, we must be prepared to take proactive actions to promote public health and safety, including new education standards and social distancing requirements. We’ll assist facility owners in creating safe and healthy interior settings so that they may return with peace of mind.

All areas will be thoroughly cleaned and disinfected during this extended absence. Still, parents, kids, and staff will also want confidence that they will not be returning to the same pre-pandemic building conditions that do not aggressively address the new concerns we confront. In close quarters of teaching, new personal disciplines will be required, but they will also demand faith that schools employ superior approaches to improve and maintain safety and cleanliness. Needlepoint bipolar ionization may be the solution for all the facilities.

This needlepoint bipolar ionization solution

Needlepoint Bipolar Ionization can be Used Together With HVAC SystemThis needlepoint bipolar ionization solution treats the air by creating natural positive and negative ions and releasing them into an HVAC system’s forced air circulation, where they may move throughout the facility. TheThe ions may target viruses, bacteria, pathogens, and mold at the molecular level, breaking them down and stripping them of the hydrogen molecules they need to survive.

Using their current air handling systems, facility owners may use needlepoint bipolar ionization to improve the air quality in their buildings. This saves money, time, and energy while also boosting the cleanliness & safety of the air the inhabitants breathe. Particles such as dust, dander, smoke, scents, and even viruses and germs can be found in the air around us.

The unique NPBI technology helps eliminate particulates in the air by bringing ions into the area via the airflow in your ventilation system. Agglomeration occurs when these ions diffuse over an area and seek for and create bonds with particles in the air. This causes a snowball effect in which particles tend to cluster together.

Needlepoint bipolar ionization is a technique

Needlepoint bipolar ionization is a techniqueNeedlepoint bipolar ionization is a technique that generates positively and negatively charged particles in HVAC systems and portable air cleaners. Manufacturers of these sorts of devices may sell this technology to assist in eliminating viruses from the air, such as SARS-2-CoV, the virus that causes COVID-19, or allow surface disinfection of surfaces within a treated area, provided they have evidence to indicate efficacy. This is a new technique, and a minimal study examines it outside of the lab.

The evidence for safety and effectiveness for emerging technology, such as filtration, is less well documented than more established ones. Unless specific care is taken in the product design and maintenance, needlepoint bipolar ionization can potentially develop ozone and other potentially dangerous by-products inside.

Some technologies such as air cleaners

Some technologies such as air cleaners and filters help provide clean indoor air. However, the coronavirus particles are tiny and may not be eliminated by filtration. However, after the ionized particles are released to the indoor environment in your facility, they combine with all other particles in the air, including the coronavirus particles. The particles then undergo the snowballing process, where they become huge and can get filtered.

needlepoint bipolar ionization can potentially develop ozoneThe most popular method for capturing airborne SARS-CoV-2 is filtration, which scientists and regulatory organizations usually approve. Cleaning indoor air should be at the forefront of all mitigation methods to prevent the virus from spreading because COVID-19 is a respiratory illness – but it isn’t. So when the CDC recently announced instructions on keeping facilities open safely, which included social distance, wearing masks, hand washing, surface cleaning, and contact tracing, it took it off the priority list.

The capacity to disinfect the air in any indoor space has been demonstrated, is available, and reasonably priced. It is frequently less than 50 cents per square foot of conditioned space to clean the air in heating, ventilation, and air conditioning ducts. Many companies also provide no-cost financing with modest monthly installments. Aside from that, some installations provide Indoor Air Quality (IAQ) as a service with no upfront fee.

The new technologies also clean the fan coils, reducing the requirement for outside replacement air. This saves electricity, which typically outweighs the disinfection cost.

 

Call Now for more information

1-800-368-8385

What are the 3 best Features and Benefits of Needlepoint Bipolar Ionization?

What are the 3 Features and Benefits of Needlepoint Bipolar Ionization?

Needlepoint bipolar ionization is a process that has been proven to provide clean indoor air. The air is infested with dust, odors, germs, smoke, and disease-causing pathogens such as mold and viruses. These particles are sometimes invisible and are a danger to health. Needlepoint bipolar ionization works by introducing ions in the environment.

The technology mimics the naturally occurring ions present in the environment giving it freshness. The natural ions occur through the energy from sunlight, crashing waves, and running water. These ions constantly work to make sure outdoor air is fresh. Similarly, the technology brings the outdoor freshness indoors.

The best feature and benefit of needlepoint bi-polar ionization

The best feature and benefit of needlepoint bi-polar ionizationThe best feature and benefit of needlepoint bi-polar ionization targets particles. Since coronavirus was declared a global pandemic, the need for fresh indoor air heightened. Coronavirus is a respiratory disease, and thus its virus is harbored mostly in the air like other disease-causing pathogens. The virus particles are too tiny and are not visible, thus posing more danger.

Needlepoint bipolar ionization technology improves indoor air by getting rid of particles and pathogens. As the technology works, the ions it produces collide with particles in the air, which leads to a charge that attracts other particles that are charged oppositely. This process leads to the development of even larger particles captured by the filtration system easily. The process has been tested by an independent laboratory and has been seen to work effectively. It is also safe since it doesn’t produce ozone as a by-product.

Facility owners should consider needlepoint bi-polar ionization

Needlepoint bipolar ionization technology improves indoor airFacility owners should consider needlepoint bi-polar ionization technology to eliminate pathogens. Coronavirus is a disease-causing pathogen with more long-term effects once it infests a facility. It could lead to the closure of the facility for up to fourteen days. This could be not good, especially for business. However, the technology helps in making the indoor clear of the virus. Coronavirus contains a hydrogen ion which is eliminated by the ions produced by needlepoint bipolar ionization technology.

The hydrogen ion in coronavirus helps it survive in the air, ready to infect a new host. The snowball effect of the technology helps get rid of 99 percent of the virus in the air. This technology increases the size of the particles of the virus, making it easier to eradicate from the environment. Also, without the hydrogen ion, it is impossible for the virus to infect a new host.

Needlepoint bipolar ionization has served the purpose of fighting against coronavirus

 Needlepoint Bipolar Ionization fighting against coronavirusNeedlepoint bipolar ionization has served the purpose of fighting against coronavirus. The virus is the threat that many facilities are facing. Using the technology to clear the air of any dust, pollutants, bacteria, viruses, and other particles is vital in the fight against the virus. Also, it may help curb other diseases such as allergies and influenza.

Showing the customers and employees that you are putting efforts into the fight against the virus shows that you care about their wellbeing. This helps them gain trust in the facility, thus leading to long-term benefits such as returning clients. The productivity of the employees goes high since there is no continued risk of sick leaves.

Call Now for more information

1-800-368-8385

Does Needlepoint Bipolar Ionization Improve Air Quality?

Does Needlepoint Bipolar Ionization Improve Air Quality?

Great indoor air quality has always been a point of consideration for facilities and business owners. It has an effect on the health of the people in the facility and the equipment and processes. Now more than ever, indoor air quality is important due to the novel COVID-19 pandemic. SARS-COV-2, which leads to COVID-19, has been termed an airborne virus whose droplets stay in the air for hours, exposing people to the possibility of contracting the virus.

However, we purpose to capture the attention of managers and business owners on the most effective and efficient mode of indoor air quality improvement, which is the needlepoint bi-polar ionization. This method of air purification eradicates disease-causing pathogens, including microbes and viruses.

Air quality purification works by emitting ionized

NPBI is a form of air quality purification that works by emitting ionized particles into the air to neutralize all contaminants. The charged ions released to the air capture gaseous and other pollutants present in the air to purify indoor air. The ions used for air purification are created when electricity is pulled into a tube containing two electrodes, resulting in positively and negatively charged ions.

The ions then react with water vapor in the air resulting in free radicals, which act against contaminants and microorganisms, killing them. This is the best form of air purification as it kills all contaminants rather than trapping them in media filtration. However, for ultimate good results, we recommend that facilities use both media filtration and needlepoint bi-polar ionization for maximum positive results.

The best mode of air quality qualification

best mode of air quality qualificationNumerous independent surveys have proven that NPBI is the best mode of air quality qualification, killing about 99.4 percent of the novel coronavirus in about 30 minutes. However, this is not to say that it is the only method that may combat the virus, but it is the best so far when it comes to eradicating the SARS-COV-2 virus within a space.

NPBI may be used in many facilities, but not all of them. For that reason, facility owners should consult first if their facilities are fit for the technology to avoid using a lot of energy with little indoor air quality purification. Involving the services of a professional team responsible for the technology to improve the indoor air quality for your industrial or commercial facility, we offer you the best technology that suits your special needs perfectly.

Expert installation

Does Needlepoint Bipolar Ionization Improve Air Quality?Apart from protecting against coronavirus, needlepoint bi-polar ionization is environmentally friendly. Traditionally used bipolar ionization produces ozone in the air as a byproduct. However, the current technology does not emit ozone. Also, involving the services of an expert in the installation of the technology is crucial as they will know which one best fits your commercial facility or school. Also, check to ensure that the solutions you use are validated to mean that they will not emit ozone in the air.

NPBI also saves on energy because it operates by circulating indoor air. This way, your HVAC system does not need to use outside air, reducing loads. Similarly, any odors and organic compounds are oxidized into gases already present in the air that we breathe.

Call Now for more information

1-800-368-8385

What is needlepoint bipolar ionization?

What is needlepoint bipolar ionization?

What is needlepoint bipolar ionization?Needlepoint bipolar ionization is also referred to as “ionizer HVAC systems.” It is a process by which ions, hospitals, and other facilities. This technology is useful in the fight against COVID-19. The world is faced with the novel virus that has brought trauma to many people and business owners. This is because businesses have had to be shut down for a while in case of a coronavirus case reported in their corporations. This has led to many losses. To avoid such occurrences, business owners have had to tighten their grip on preventative measures that they employ in the fight.

Working of needlepoint bipolar ionization

Needlepoint bipolar ionization works by introducing positively and negatively charged oxygen ions. These ions are then distributed to the rest of the building by the HVAC systems already existing in the facilities. As a result, the charged ions absorb the neutralized pollutants. Consequently, the mold, viruses, and bacteria are killed by ionization and put together to form large clumps.

Since the bacteria and viruses have now been converted to large clumped particles, making it easier for your air purifiers and filters to trap the contaminants more effectively. This way is an efficient way of preventing disease-causing pathogens and contaminants from circulating in the facilities through the AC systems.

The working of needlepoint bipolar ionizationThe ions generated by needlepoint bipolar ionization technology are harmless and thus are responsible for cleaning the air in rooms. Many platforms utilize this technology. The medical industry has been known to utilize this technology way before a coronavirus hit the world. Now that the virus is adamant, more facilities and businesses are more serious about using the technology.

Airlines, for example, Boeing, have used needlepoint bipolar ionization to protect their customers from coronavirus. Bearing in mind that the virus came from Wuhan, China, and was spread to other countries through travel, mainly air travel, airlines cannot afford to ignore the efficacy of needlepoint bipolar ionization, which will protect its staff and consumers.

About covid-19 virus

The pathogens that cause viruses, such as COVID-19, are so tiny that we cannot see them in the air or on surfaces. We might employ all other protective measures that sanitize and disinfect surfaces we encounter, but the microbial may remain suspended in the air. This is a more reason to use needlepoint bipolar ionization because the surfaces will be protected if the air is free of the disease-causing pathogens. You cannot ignore the efficacy of this technology because it saves a lot too.

What is use of needlepoint bipolar ionization in covid-19Most facilities have existing HVAC systems installed; therefore, they use them for needlepoint bipolar ionization. In this way, their facilities are always protected, and they need not keep involving the use of technicians regularly. Some facilities have customized their systems to spray the ions in rooms every few hours to ensure that the rooms always have clean air.

In summary, needlepoint bipolar ionization has helped a lot in the fight against coronavirus. Its utility has been aided by its easy installation, utilization of already installed HVAC systems, and its efficacy in cleaning room air. Business owners and managers of facilities that have not yet considered this technology should install it to enjoy its benefits.

Call Now for more information

1-800-368-8385

Needlepoint Bipolar Ionization

Needlepoint Bipolar Ionization

Needlepoint Bipolar Ionization very useful in covid timeThe results generated from needlepoint bipolar ionization are notable as they are used in the war against COVID 19. One may need to understand first the needlepoint bipolar ionization to establish its use. This is a technology-based on the concepts of charged particles on the cleaners. It is used in HVAC systems or portable/moveable air cleaners. The main aim of selling these products is to remove viruses, not necessarily COVID 19 but other types of viruses. They enable surface fumigation of surfaces thus are essential in ensuring hygiene and reducing the infection rate.

Scientific information related to needlepoint bipolar ionization

According to scientists, the needlepoint bipolar ionization’s primary use is to clean indoor air, primarily appropriate for rooms prone to infection of the virus. They are safe for use as they do not expose someone to harmful ozone levels or other by-products. So the question is, what is an ion? Basically, it can be defined as a molecule or atom that can be either positively or negatively charged; for the ion to attain neutrality, it must gain or lose electrons. The fact that ions are present in nature means everywhere now activates them to clean the air by creating them through the use of rushing water, crashing waves, and sunlight.

The HVAC system

Needlepoint Bipolar Ionization help to fight with corona virusThe technologies developed by needlepoint bipolar ionization (NPBI) is the one responsible for the generation of ions that are not harmful and therefore take up the role of cleaning the air in the rooms. The process has to be completed by an HVAC system that generates and releases ions into the airstream. The ions, after release, form bonds with the particles. Thus they cluster together, making it easier for the system to flash out the air. Moreover, they are various platforms that the needlepoint bipolar ionization can be used.

Where and when has needlepoint bipolar ionization been used? The NPBI technology has been available for use in the medical industry even before the COVID 19 pandemic. It has recently gained traction due to the infection rate caused by the COVID 19 virus. Therefore, it is being used in schools, airports, and business premises. The most common area that has embraced this technology is the airports. An example is Boeing which has established the practice of corona discharge air ionization.

Other benefits of Needlepoint Bipolar Ionization

The other benefits that come with the use of the technology include reducing the rate of energy consumption, reducing or minimal carbon footprint, and meeting the passenger’s needs in terms of assurance for safety. The spread of the virus is entirely caused mainly by Needlepoint Bipolar Ionization uses and demandintercontinental traveling hubs such as airports. It can be agreed that the leading cause for infection in some countries was due to interaction with people from the infected countries leading to the need to establish such available technologies to reduce the spread.

In summary, the use of the needlepoint bipolar ionization though not quite fully exploited has helped to reduce the infection rate of the COVID 19 virus. Its benefits are notable as they do not interfere whatsoever with human health. Installation of the system in the airplanes is a lifesaving idea.

Call Now for more information

1-800-368-8385

 

How Does Needlepoint Bipolar Ionization Work?

Needlepoint Bipolar Ionization

Needlepoint Bipolar IonizationOur current understanding of the relation between indoor air quality and our health leads us to needlepoint bipolar ionization. There has been much concern over the air quality we breathe, how it affects our health, and what people can do, especially those with large facilities to prevent and control infections from the air. All these concerns lead us to help you choose the right air cleaning system to ensure your safety and cleanliness of your facility. Midwest Parts Centre offers you a high-quality air cleaning system. Its operation is what makes the system effective for your indoor air cleaning. We, therefore, take you through

How needlepoint bipolar ionization works.

  • Needlepoint bipolar ionization system releases negative and positive molecules in the air that either gain or relinquish electrons to become neutral. These ions clear the air in a natural way outdoors and indoors. The negative and positive ions are formed with energy from water vapor, waves, and sunlight. This GPS technology generates ions that are Ozone-free and lack other harmful substances to bring you the outdoor air freshness you need.
  • Air pollutants such as dust, pollens, and other pathogens like viruses in the air all get suspended in the air we breathe, only that we cannot see them with our naked eyes. The system’s released ions fill the airstream through your ventilation system or HVAC unit as its delivery model.
  • The ions disperse in the air, and they form large particles that form a snowball impact making the particle integrate. The integrated systems formed by particles further filter out the air you breathe safely, rendering other pathogens inactive thus unable to harm you. The procedure has been backed up by laboratory tests and proven to be effective.

Like the Global Plasma Solutions and bipolar ionization, needlepoint bipolar ionization also functions in schools and campuses, healthcare facilities, transport services facilities, and large spaces, among many other institutions that encounter high-traffic people. Besides, needlepoint bipolar ionization eliminates unwanted smells and odor from your space and saves you up to 30% on energy consumption. The system is energy efficient and prevents you from paying high electricity costs that spur your utility bills at the end of the year. This system technology is safe for human consumption. It is a certified system by independent laboratories to be free from ozone, making it useful for your industrial and commercial air cleaning needs.

Very effective and useful

The needlepoint bipolar system technology is effective; however, you should not ignore to follow the public health guidelines on keeping a safe and clean environment in fighting infectious diseases. In the fight against the spread of Covid-19, the federal government has enacted laws and guidelines that should be adhered to. You should also follow Covid-19 guidelines as stipulated by the CDC. The use of needlepoint bipolar ionization should function as additional measures and not the only precautions to clean the spaces we occupy.

There is much to benefit from while using the needlepoint bipolar ionization system. The technology works to purify the air within us and make our environment safe. Contact Midwest Parts Centre today for a detailed explanation regarding needlepoint bipolar ionization.